As a Windows user, you must be cautious when “System Service Exception Windows 10” error occurs. This type of error is similar to KMode Exception Not Handled issue which results in the blue screen. If you see prompt titled SYSTEM_SERVICE_EXCEPTION on your Windows 10, it usually appears along with a blue screen. The blue screen of death (BSOD) error itself has its own code. You can see the code 0x0000003B on the blue screen as well. With the blue screen and the error code, your Windows 10 PC has officially been malfunctioned. This issue can be caused by the disconnections of the Windows installation and the drivers in the Windows 10 PC itself.
If your Windows 10 PC experiences System Service Exception Error, then it means there are errors in the system codings. Since the Windows system routinely checks and compiles the processing within the system, every switch from nonprivileged code to privileged code will cause the System Service Exception Error.
Other than the misaligned codings, System Service Exception Error can also happen when the graphics card drivers cross over and give incorrect information to the kernel code.
However, you have to note that SYSTEM_SERVICE_EXCEPTION error in Windows 10 often happens because of corrupt, outdated or malfunctioned drivers. In addition to outdated drivers, the bad memory or incorrect registry configuration may also cause this error to happen.
In order to know more about the SYSTEM_SERVICE_EXCEPTION error on Windows 10, check out the brief explanations about the factors and the quick fixes we have curated below.
Factors which Cause SYSTEM_SERVICE_EXCEPTION Error
Since this type of error often originates from the malfunctions in the system, you must know the cause of it first to fix it. Several factors which often contribute to this error are as follows:
Step 1: Outdated Device Drivers which needs to be updated.
Step 2: A specific type of Microsoft Security Update with the size of KB2778344
Step 3: Viruses or Malware roaming in the system.
Step 4: Corrupt Windows Registry.
Step 5: Errors in the Hard Disk.
Step 6: Damaged or corrupt Operating System Files.
Step 7: Some issues with RAM usage.
Basic Windows Fixes to Get Rid of System Service Exception Error
In case you need a quick fix or precaution methods to fix or avoid this error, always perform these methods below.
Step 1: Always download updates for Windows using Windows Update.
Step 2: Operate a full system scan using Windows or third-party antiviruses, like Avast.
Step 3: Make sure to update each one of the drivers in your Windows 10 PC, particularly the graphics driver. Use the best driver updater to ease the updating process.
Step 4: If you turn on Windows Defender, then you must turn off the other antivirus in your Windows 10 PC.
Step 5: If there is a problem in your current Windows 10 PC, quickly performs System Restore.
How to Fix System Service Exception Error in Windows 10
Fixing System Service Exception error requires patience and a few steps. If you are not familiar with the way around Windows system, then you must follow the steps on each method we have provided in this article. Try to perform each one of these methods and see if it works for you.
Running A Startup Repair
Step 1: Once the Windows turns back on after a restart, you must press Shift and F8 buttons to open Legacy Advanced Boot options.
Step 2: Afterward, look for the option “Troubleshoot” and click on it.
Step 3: Once a Troubleshoot screen appears, select Advanced options.
Step 4: On the Advanced options, look for the option “Startup/Automatic Repair”.
Step 5: Shortly after, the repair tool will scan your Windows 10 system and fix the problems automatically.
Step 6: Once the repairing process finishes, you can restart your Windows 10 PC. If the blue screen with the System Service Exception error notification does not show up anymore.
Performing Disk Check and System File Checker
If the automatic repair does not work, then you can try to run disk check and system file checker. To do so, follow the steps below.
Step 1: Open a command window by pressing Windows and X buttons.
Step 2: Proceed to select the option Command Prompt as Admin.
Step 3: A command prompt window will appear and you have to type the following command and press Enter after each one.
sfc /scannow chkdsk /f C:
Step 4: The command will run in itself to identify, repair and fix bad sectors on your hard disk drive.
Step 5: At last, reboot your Windows 10 PC to save the changes made.
Installing Microsoft Hotfix
Step 1: Check out the Microsoft Support and search for Hotflix.
Step 2: Proceed to download Hotfix installer and install it.
Step 3: Finally, reboot your Windows 10 PC to apply the changes.
Installing Latest Drivers
Since the System Service Exception error on Windows 10 can be caused by outdated drivers, you will need to get the latest drivers on your Windows PC. To install the latest drivers on your Windows 10 PC, follow the steps below.
Step 1: Open the Run box by pressing Windows and R buttons.
Step 2: Afterward, type devmgmt.msc and press Enter to open Device Manager.
Step 3: You can see drivers with yellow exclamation marks among the other drivers on the list. Update each one of them to get the latest version of the driver.
Step 4: Make sure to follow the instructions until the updating process finishes.
Step 5: In case you cannot perform the updates, then you can uninstall the driver and restart your Windows 10 PC.
Step 6: Once the Windows 10 PC turns back on, the drivers will automatically install itself.
Step 7: Afterward, you can download and install the Intel Driver Update Utility.
Step 8: Run the Driver Update Utility and click Next.
Step 9: Look for the option “Accept the agreement” and check on the box.
Step 10: Then, proceed to select “Install”.
Step 11: Once the System Update finishes, you can click “Launch”.
Step 12: Afterward, proceed with the scanning by selecting “Start Scan”.
Step 13: Once the scanning finishes, you can click Download.
Step 14: After the downloading finishes, you can click “Install” to get the latest Intel drivers for your Windows 10 PC.
Step 15: Once the installation finishes, you can restart your Windows 10 PC.
Uninstall Particular Programs
Often, a lot of third-party programs clash with the operating system of your computer. These programs can also cause the System Service Exception error in Windows 10 PC if you do not perform regular scanning.
In order to fix such an error, you can uninstall the programs which may potentially harm your Windows 10 PC. Any programs which may cause harms including torrent apps, VPN software, NVIDIA or other graphics drivers, as well as an external hard disk. If you have any of these programs, you can uninstall them to fix the System Service Exception error.
Deleting Windows Update Number KB2778344
Step 1: First, you must boot your Windows 10 PC to Safe Mode.
Step 2: Afterward, go to the Control Panel.
Step 3: Select the section “Programs”, then go to “Programs and Features”.
Step 4: Then, click “View installed updates” in the top-left area.
Step 5: On the search bar, type in “KB2778344.”
Step 6: Afterward, right-click on the Security Update for Microsoft Windows (KB2778344). Choose the option “Uninstall” to delete the update.
Step 7: Click Yes on the confirmation box.
Step 8: At last, reboot your Windows 10 PC. Turn it back on and see if the System Service Exception error is gone.
Running Windows Memory Diagnostic
Step 1: Look for the “Windows Memory Diagnostic” by typing it on the Windows search bar.
Step 2: A list of options will appear. Select “Restart now and check for problems.“
Step 3: During the restarting process, Windows will check for some RAM errors. In doing so, you may also get the report about the Blue Screen of Death (BSOD) error.
Step 4: Afterward, reboot your Windows 10 PC and check if the System Service Exception error is gone.
Running Windows BSOD Troubleshoot Tool
Try to run the Windows BSOD Troubleshoot tool to automatically get rid of the BSOD on your Windows 10. To do so, follow the steps below.
Step 1: Look for the “Troubleshoot” option on the Windows menu and select Troubleshooting.
Step 2: Afterward, click on the section “Hardware and Sound”.
Step 3: Next, you can select “Blue screen under Windows”.
Step 4: Then, click on the option “Advanced” and keep in mind to check the “Apply repairs automatically” box.
Step 5: Select Next and wait until the troubleshooting finishes.
Step 6: At last, reboot your Windows 10 PC and see if the System Service Exception error in Windows 10 is gone after it turns back on.
Running CCleaner and Antimalware
Step 1: Download CCleaner first and install it. If you need an antivirus, you can download one too.
Step 2: Open the antivirus and let it search and get rid of the viruses and malware in your Windows 10 PC.
Step 3: Once the malware is found, the antivirus will automatically remove them.
Step 4: Check on the drives/folders which need to be cleaned up.
Step 5: Afterward, select the option “Run Cleaner” and let CCleaner do its job.
Step 6: You can also open the “Registry tab” to clean more of the potentially harmful registry.
Step 7: Choose “Scan for Issue” and allow CCleaner to scan.
Step 8: Make sure to back up your registry first before you perform the cleaning.
Step 9: After you make the backup, you can finally proceed to select “Fix All Selected Issues”.
If you see prompt titled SYSTEM_SERVICE_EXCEPTION on your Windows 10, it usually appears along with a blue screen. You can see the code 0x0000003B on the blue screen as well.
With the blue screen and the error code, your Windows 10 PC has officially been malfunctioned. This issue can be caused by the disconnections of the Windows installation and the drivers in the Windows 10 PC itself.
To fix it, you can perform basic cleaning methods you can do for Windows 10 PC. Other than that, you can get rid of potentially harmful software and clean your Windows PC in the process.